中文站 / English
中文站 / English
EOL Test System
Current battery module and pack testing process is lowly automated, and the record analysis is in poor capabilities. Aimed at these problems, HYNN proposed a fully intelligent tester, EOL test system. The system integrates insulation testing, BMS calibration, OCV testing and other functions to achieve the entire workflow fully intelligent and automated, in order to reduce labor cost and improve efficiency.
Details

System Characteristics
1)The EOL tester can test the insulation and voltage endurance of positive and negative poles of battery and its shell, record the real-time insulation resistance and leakage current value of positive and negative poles on the shell, and transmit to upper computer management system in the manner of communication for data integration, revelation, and preservation.
2)The EOL tester can test AC impedance of the battery, record the real-time value of AC impedance in the process of testing, and transmit to upper computer management system in the manner of communication for data integration, revelation and preservation.
3)The EOL tester offers controlled DC power supply with an output range of 0 - 30 V and an output current of 5 A and sets up the DC current output through the upper computer management system in the manner of communication.
4)The EOL tester offers multichannel CAN communication interface, as well as BMS status expansion interface, capable of carrying out two-way communication with BMS system and simulating and testing various functions of battery pack BMS, and conducts data integration, revelation, and preservation through upper computer management system.
5)Upper computer management system
The upper computer management system offers editing function for testing procedure, conducts editing configuration of the procedure required to be tested, and preserves it as a document in local area. According to preset test procedure, the upper computer management system automatically starts the test  procedure, automatically controls the start, stop and running of scanning gun, charging and discharging tester, comprehensive tester, in-process inspection and other equipment, and collects all kinds of real-time and computing parameters transmitted from charging and discharging tester, comprehensive tester, single unit in-process inspection device, and BMS system and integrate them to form the test report and record.


Equipment Parameters

图片关键词


5V Power Supply Cabinet 5V Power Supply Cabinet

HYNN power battery testing system is mainly designed for power battery. Designed with high accuracy, high flexibility and high performance, it can meet all test requirements for battery with the range of 0-5V (Voltage), 20mA-30A-400A (Current).

negative pressure formation needle bed negative pressure formation needle bed

HYNN negative pressure formation needle bed applies with six-sided protection scheme. Each storage position layer is isolated with stainless steel plate and fire proof rock wool; Needle bed is equipped with water fire protection and gas fire protection; Storage position is designed with smoke and temperature sensors. Safe and reliable, it is the most popular and advanced design scheme for ternary cells and lithium ferrum battery testing nowadays.

High-temperature Pressure Forming Equipmen High-temperature Pressure Forming Equipmen

At present, a heating clamp is used to press the two sides of the battery during the production process of soft package batteries. The gas during the formation can be discharged into the airbag under the pressure, so that the electrolyte can be fully infiltrated and form a good SEI film during the formation of the battery cells.

MES System MES System

The MES System of HYNN can quickly and effectively realize real-time tracking and monitoring of production sites through the system's refined production scheduling, implementing production process monitoring, process route based production schedule management, and real-time information collection, analysis and feedback functions. It effectively solves the core issues in site management, and increases support for the site, thus creating a reliable manufacturing execution management system for the enterprise.

WMS System WMS System

WMS system can well record the information of product storage and delivery and allows query of the occupation status of each warehouse area and location in real time. Besides, it can review and print various warehouse-in and warehouse-out receipts to facilitate the warehouse staff to master the warehouse inventory in real time. The system also allows multi - user management, and the setting of management authority for each user group.

We have any Suggestions and requirements for us. We can inform you through the comments, and we will contact you immediately。

Name
E-mail
Phone
Content
National Service Hotline
+86-400-6580-029
    Shenzhen HYNN Technologies Co., Ltd.
  • Phone:

    +86-755-33030160

  • Faxes:

    +86-755-33030161

  • E-mail:

    info@hynn.com.cn

  • Site:

    Building C, Baifuli Industry Park, Huahui Road, Dalang Street, Longhua District, Shenzhen, China

  • Webchat's name:

    HYNN Technologies

Copyright ©2006-2018 Shenzhen HYNN Technologies Co., Ltd. Yue ICP Bei No. 14051008